Мир Моделей! Форумы по моделизму. http://forum.modelsworld.ru/ |
|
Royal William 1719 1/72-cross section http://forum.modelsworld.ru/viewtopic.php?f=59&t=12996 |
Страница 1 из 1 |
Автор: | NMBROOK [ 01 ноя 2014, Сб 00:38 ] | |||||
Заголовок сообщения: | Royal William 1719 1/72-cross section | |||||
Hello everyone I have recently started a new project.I am building Royal William to the scale of 1/72 using Euromodel plans and photos of the four contemporary models still in existence.The model will be of framed construction,but that of the Navy Board style,as apposed to historically accurate. All construction will be in Swiss Pear with ebony used for many of the details.I am drafting all the frames by hand using the information on Euromodel's sheer plan. The first task was to 'prove' that the frames could be made easily.I had concerns as the upper section would work out at 2mm thick.There was no need for concern as the first frame assembly I made up proved to be very strong.Between every 2 full and 2 half frames will be a movement gap.This will stop problems of movement due to swelling of the frames and prevent cracking. Here is the first frame assembly which was my 'test bed' Kind Regards Nigel
|
Автор: | NMBROOK [ 01 ноя 2014, Сб 00:59 ] | |||||||
Заголовок сообщения: | Re: Royal William 1719 1/72 | |||||||
After 'proving' that the construction would be strong enough,I moved onto the keel and stem
|
Автор: | NMBROOK [ 01 ноя 2014, Сб 01:11 ] | ||||||||
Заголовок сообщения: | Re: Royal William 1719 1/72 | ||||||||
Continuation and fitting of keel
|
Автор: | NMBROOK [ 01 ноя 2014, Сб 01:21 ] | ||||||||
Заголовок сообщения: | Re: Royal William 1719 1/72 | ||||||||
Then on to the making of the knighthead timbers in Pear and Ebony.This brings me to where I am today,so it will be a little while before the next update Kind Regards Nigel
|
Автор: | sudomekh [ 01 ноя 2014, Сб 01:53 ] |
Заголовок сообщения: | Re: Royal William 1719 1/72 |
great work! |
Автор: | NMBROOK [ 02 ноя 2014, Вс 03:28 ] |
Заголовок сообщения: | Re: Royal William 1719 1/72 |
Thank you Sudomekh Kind Regards Nigel |
Автор: | NMBROOK [ 29 июн 2015, Пн 15:11 ] |
Заголовок сообщения: | Re: Royal William 1719 1/72-cross section |
A major update in that this build has had a change of direction A promotion at work means I have much less freetime to be able to devote to this hobby which has forced a rethink of my projects I have decided that this build will now be a cross section and the prow assembly will used on a full plank on bulkhead build of the same vessel. Kind Regards Nigel |
Автор: | Odessa [ 19 авг 2015, Ср 11:34 ] |
Заголовок сообщения: | Re: Royal William 1719 1/72-cross section |
Страница 1 из 1 | Часовой пояс: UTC + 3 часа |
Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |